Yeni Harrow Rotary Green Star 9 M Euro With Replaceable Teeth John De Döner Tırmık























Düşük fiyattan ekipman satın almaya karar verirseniz gerçek satıcı ile iletişime geçtiğinizden emin olun. Ekipmanın sahibi hakkında bulabildiğiniz kadar çok bilgi edinmeye çalışın. Hile yapmanın bir yolu da kendinizi gerçek bir şirket olarak göstermektir. Şüpheye düşmeniz halinde, geribildirim formu üzerinden ek kontrol yapmamız için bizi bilgilendirin.
Bir satın alma yapmaya karar vermeden önce seçtiğiniz ekipmanın ortalama fiyatını anlamak için çeşitli satış tekliflerini dikkatli bir şekilde inceleyin. Beğendiğiniz teklifin fiyatı benzerlerinden çok daha düşükse biraz düşünün. Önemli bir fiyat farkı gizlenen kusurların veya satıcının dolandırıcılık yapma çabasının bir göstergesi olabilir.
Benzer ekipman için ortalama fiyattan çok farklı fiyattaki bir ürünü satın almayın.
Şüpheli güvencelere ve ön ödemeli ürünlere onay vermeyin. Şüpheye düşmeniz halinde, ayrıntıları netleştirmekten çekinmeyin, ilave fotoğraflar ve ekipmanın belgelerini isteyin, belgelerin orijinalliğini kontrol edin, soru sorun.
En yaygın dolandırıcılık biçimi. Hileci satıcılar bir ekipmanı satın alma hakkınızı “ayırtmak” için belirli bir miktar peşin ödeme talep edebilir. Böylelikle dolandırıcılar yüksek miktarda para toplayıp ortadan kaybolabilirler, bir daha iletişime geçemezsiniz.
- Ön ödemenin karta transferi
- İletişim sırasında satıcı şüphe uyandırıyorsa para transferi işlemini doğrulayan belgeler olmadan peşin ödeme yapmayın.
- “Emanetçi” hesabına transfer
- Bu tür bir istek sizi harekete geçirmelidir, büyük ihtimalle bir dolandırıcı ile iletişim kuruyorsunuz.
- Benzer isimdeki bir şirket hesabına transfer
- Dikkatli olun, dolandırıcılar, adda küçük değişiklikler yaparak kendilerini iyi bilinen şirketler gibi göstermeye çalışabilir. Şirket adı şüpheliyse para transferi yapmayın.
- Gerçek bir şirketin faturasına kendi bilgilerini yerleştirme
- Bir transfer gerçekleştirmeden önce, belirtilen detayların doğru olduğundan ve belirtilen şirketle ilişkili olduğundan emin olun.
Satıcı iletişim bilgileri














designed for spring and autumn loosening of soil covered with stubble or other plant debris, planting weed seeds and destroying crop plants, as well as for leveling the microrelief created by the previous treatment; for spring harrowing of winter and row crops, pre-sowing tillage on plowed fields and care for perennial grasses;
destroys the monolithic crust on the soil, especially effective for corn and sunflower in the early stages of seedlings (2-3 leaves);
mulch the top layer and covers moisture, the degree of moisture retention in the soil increases three times;
saturates the soil with oxygen and nitrogen;
destroys 99% of weeds in the white filament stage;
damages up to 1% of plants (for comparison, the tooth harrow damages 10-15%);
with timely use, completely eliminates herbicides;
does not injure plants up to 15 cm high;
can be used for inter-row processing of plants up to 30 cm high, for which purpose it is necessary to remove the sections of the working bodies that interfere with the processing;
can be used for continuous sowing and perennial grasses.
attendants - 1 person (tractor driver);
it is aggregated with tractors from 80 hp;
the row spacing is adjustable from 10 cm;
the use of rotating sun-shaped disks increases the effect on the soil by 40%, promotes the activation of metabolic processes, which corresponds to nitrogen fertilizing with mineral fertilizers;
the frame is made of seamless seamless pipe 140x140x8 made of steel 09G2S;
the rack of rotary wheels is made of a solid pipe 50x50x5 without welds of steel 20;
friction units use bushings made of special composite material that do not require maintenance; the material is patented, copyrighted by Avers-Agro;
the sleeve on the bracket and rocking chair (from a special composite material does not require lubrication), which allows you to copy the relief of the soil and provides the same depth of processing;
for each sprocket wheel, two sealed non-serviceable bearings from SKF are additionally protected by anthers;
the Green Star harrow tooth is made of 30HGSA quality hardened steel;
the tooth shape of the rotary Green Star harrow is the copyright of Avers-Agro;
special tooth geometry, the tooth enters the ground at a right angle;
the design of the working body provides a quick replacement of the tooth or the entire sprocket in the field. Interchangeable teeth are individually attached with high-strength bolts and self-locking nuts;
a compression spring of different wire sections from 6 to 12 mm is installed on each section, which provides individual adjustment depending on field conditions;
availability of options for stars of various shapes for different field crops and agricultural tasks.
Additional equipment:
turbo-cutters - allow using the harrow for crop residues (sunflower and corn) in the autumn as a chopper;
skrebnitsa - allows you to save the sowing of row crops from the filamentous weed;
tanks for bulk and liquid fertilizers.
Specifications
Operating speed, km / h ...............15-20
Working width of capture, m ............. 9
Productivity, ha / h ............................ 13.5-18
Processing depth, mm ...................... 30-70
Sections of working tools, pcs ........... 40
Working bodies, pieces ...................... 80
Step of working tools, mm ................. 110
Weight of one section, kg
- with collapsible wheels ......... 38
- with solid wheel ..................... 34
Maximum pressure
hydraulic oils, bar ............................... 180
Overall dimensions in working position:
Width, mm ........................................... 8750
Length, mm ......................................... 6670
Height, mm ......................................... 1250
Overall dimensions in transport position:
Width, mm ............................................ 2810
Length, mm .......................................... 5350
Height, mm ........................................... 2750
Unit weight, not more than, kg
- with collapsible wheels ........... 3260
- with solid wheel ....................... 3100
It is aggregated with tractors, class from 100 hp
Service personnel, personnel ................ 1 (tractor driver)
The aggregation method is on a three-point linkage